We are able to offer an extensive range of Long Spigot fittings, which are available in PE100 black and PE100 blue and PE80 yellow where possible. SDR11 and SDR17/17.6 options are available depending on your system requirements. Offered in sizes 20mm up to 400mm, we are also able offer a selection of pupped, bends and mitred elbows in larger sizes.
|
Reducers
An extensive range of long spigot reducers are on offer in sizes 25 x 20mm up to 400 x 355mm.
Literature Available: (Login Required)
Spigot Reducer Factsheet
DuraFuse Product Brochure
|
|
Elbows
Our range of long spigot elbows are available as 45° and 90° options. The 90° elbows are available in 20mm up to 400mm and the 45° elbows are available in 25mm up to 400mm.
Literature Available: (Login Required)
Spigot Elbow Factsheet
DuraFuse Product Brochure
|
|
Tees
Our long spigot tee range contains equal tees in 20mm to 400mm, reduced branch tees 63 x 32mm up to 315 x 250mm, flanged branch tees which allow you to connect to a metal system in sizes 63 x 50mm up to 315 x 150mm and all flanged equal tees in 110 x 100 up to 315 x 300mm.
Literature Available: (Login Required)
Spigot Flanged Branch Tee Factsheet
Spigot Equal Tee Factsheet
Spigot Reduced Branch Tee Factsheet
|
|
Stub Flanges
A stub flange allows you to connect a PE system to another system such as ductile iron through the use of a backing ring.
Available in sizes 32mm through to 400mm - this range of products can also be supplied as a stub flange assembly.
Literature Available: (Login Required)
Spigot Stub Flange Factsheet
DuraFuse Product Brochure
|
|
End Caps
Our long spigot end caps provide a solution to close off the end of a PE pipeline system and are available in sizes 20mm up to 400mm.
Literature Available: (Login Required)
Spigot End Cap Factsheet
DuraFuse Product Brochure
|
|
Pupped Fittings
The use of pupped fittings can facilitate onsite butt-fusion and electrofusion. All our pupped fittings are offered with 500mm pups and we are able to offer reducers, 90° elbows, 45° elbows, equal tees, reduced branch tees, stub flange assemblies, short branch tees and end caps.
Literature Available: (Login Required)
Pupped Fitting Factsheet
DuraFuse Product Brochure
|
|
Bends and Mitred Elbows
Our range includes 90°, 45°, 22.5° and 11.25° degree formed bends and mitred elbows in sizes 90mm to 400mm.
Literature Available: (Login Required)
Mitred Elbow Factsheet
Formed Bends Factsheet
DuraFuse Product Brochure
|
